CILBOND® FROM CIL

ADHESIVES

THE HIGH-PERFORMANCE ADHESIVE

As an alternative to the traditional, solvent-based systems, CIL has developed a broad spectrum of water-based CILBOND® adhesive systems since 1996. Thus the emissions of volatile organic compounds (VOCs) are reduced and the hazardous effects on our environment are reduced to a minimum. Over many years of research, numerous variants have been developed to which nearly all rubber bonds can be glued.

This product is available in following country: Switzerland

Contact:
Komma
 
Christoph Fritschi
Senior Sales & Product Manager
SPECIALTY CHEMICALS
phone: +41 61 326 66 31
fax:

CILBOND® 62W

CILBOND® 62W is a single-layer, water-based adhesive promoter for compounds such as NBR, HNBR, ACM, VAMAC®, and ECO and it can bind a multitude of metals and plastics.

CILBOND® 65W

CILBOND® 65W is a water-based adhesive for silicone rubber and peroxide cross-linked fluorpolymers. The material offers outstanding resistance to environmental influences. In applications such as oil seals, shaft seals, seals, valves, and rubber bearings, CILBOND® 65W is used especially against oils and high temperatures.

CILBOND® 65W also bonds silicone to fabric and is used in demanding products such as vehicle hoses and airplane seals. CILBOND® 65W can be used to bind peroxide cross-linked HNBR and ACM bonds.

CILBOND® R-7000

CILBOND® R-7000 is a component adhesion system for binding the following elastomers to metals and polar technical plastics: NR, SBR, CR, IR, NBR, EPDM, HNBR, CSM/ACSM, BR, ECO, IIR

CILBOND® R-6832

CILBOND® R-6832 is a watery primer that is used in combination with watery (for example CILBOND® R-7040) or solvent-based cover layer adhesives. This primer can be used for the following metals: steel, aluminum, brass. This material can also be used for polar plastics: nylon, polyester, cellulose, PPO, PPS, PES, PEEK, GRP / FRP, epoxide, and phenols.

CILBOND® R-7040

CILBOND® R-7040 is a cover layer adhesive for gluing elastomers to metals and polar plastics. For this, a suitable primer is required (e.g. CILBOND® R-6832). Suitable for NR, SBR, IR, NBR, HNBR, EPDM, IIR

For additional information, visit www.cilbond.com or even better: Call us!

CILBOND® is a registered trademark of CIL® used under license by DOLDER Ltd